bulkhead M10x1 M6x1

This bulkhead fitting M 10x1 M 6x1 makes greasing points behind protective walls, protective plates or other safety equipment covers,  more accessible. For this, a straight coupling is installed and from the cutting ring connection according to DIN 2353 and ISO 8434-1 a plastic tube or our high pressure hose 840 bar with a screw sleeve and a hose stud leads to the greasing point of the bearing. Here, the grease nipple will be replaced by cutting-ring fitting or by a push-in fitting in order to connect a plastic tube or a high pressure hose 840 bar. Subsequently, into the bulkhead M 10x1 M 6x1 must be connected a grease nipple. The latter is supplied by a standard manual grease gun.

Material: steel, galvanized surface

Category: Products - fittings - cutting ring fittings - bulkhead M 10 x 1 / M 6 x 1