To get detailed information of our screw sleeve, please click the picture screw sleeve.
Our screw sleeves or screw sockets are compatible with tube studs and high-pressure hoses by all renowned manufacturers of central lubrication units and central lubrication systems.
Connecting these components with screw sleeves results in a pressure-tight, stable and detachable connection.
Our screw sleeves are available in various sizes suitable for high-pressure hoses in the following diameters, 4.1 x 8.75, 6.3 x 11.3 and 1/8" x 5/16; they can be supplied in different qualities, e.g. galvanised steel, black chromated steel and stainless steel VA 1.4401/316/V4A.
To connect an 840 bar high-pressure hose with a cutting ring fitting or a push-in fitting, a screw sleeve is used together with a tube stud.
For assembly, the screw sleeve is first screwed onto the 840 bar high-pressure hose. Subsequently, the tube stud is inserted into the screw sleeve. The inner thread of the screw sleeve that must be assembled with the high-pressure hose is a left-hand thread; a left-hand thread was chosen to prevent loosening of the screw sleeve from the high-pressure hose during assembly of the tube stud.
This ensures a pressure-tight, stable and detachable connection. These screw connections are designed such that they can be established without the use of special tools and outside of specialist workshops. Then, the end of the tube stud can be assembled in a cutting ring fitting or plugged into a push-in fitting or a push-in screw fitting.
For connections with push-in fittings, only such tube studs must be used that are suitable for that kind of system. The suitable tube studs are equipped with a groove in the tube, which is then seated into the push-in fitting. For assembly, the tube stud only needs to be inserted.