Steel zinc / steel zinc-nickel / Cr-VI free
Item No. | D | G | SW | SW1 | L | L1 | Serie | Bag | Box |
---|---|---|---|---|---|---|---|---|---|
106-241-L | 6 | M 6x1 | 17 | 14 | 28 | 23 | L | 10 | 250 |
Steel zinc / steel zinc-nickel / Cr-VI free
Item No. | D | G | SW | SW1 | L | L1 | Serie | Bag | Box |
---|---|---|---|---|---|---|---|---|---|
106-243-L | 6 | M 10x1 | 17 | 14 | 60 | 40 | L | 10 | 250 |
1020-001 | 6 | Rp 1/8 BSPP | 17 | 14 | 54 | 34 | L | 10 | 250 |
Item No. | D | G | L | L1 | SW | SW1 | Serie | Bag | Box |
---|---|---|---|---|---|---|---|---|---|
1020-002 | 6 | M 6x1 | 40 | 34 | 14 | 12 | LL | 10 | 250 |
Item No. | D | G | SW | SW1 | L | L1 | Serie | Bag | Box |
---|---|---|---|---|---|---|---|---|---|
106-243-VA-L | 6 | M 10x1 | 17 | 14 | 60 | 40 | L | 10 | 250 |
Where can this bulkhead fitting be used?
This special 24° bulkhead screw connection with a greasing aid function is a perfect fitting to supply lubrication points which are difficult to reach. When the lube points and bearings are located behind protective covers and sheets, our bulkhead fitting with a grease nipple is a slim solution for manual and supplementary lubrication as well as emergency lubrication.
When for some technical circumstances the greasing block solution is too bulky and too oversized, a slim and elegant solution is required. Our bulkheads with grease nipple connection are the ideal solution here.
Some more information?
Please contact our technicians for a technical support !
What are the mounting options?
If a lubrication line has to be routed through a protective wall or a cover plate in a lubrication system, the following mounting variants are possible:
This type of bulkhead fitting is equipped with a 24° cutting ring connection according to DIN 2353 / ISO 8434-1 on one side. Here it is possible to mount a hose stud, screw sleeve and a high pressure hose 840 bar. This line is further led to the greasing point. Here at the bearing side, either a cutting ring fitting is used again or a push-in fitting and a hose stud with a claw groove. A plastic tube can also be used as a grease line.
On the other side of this straight bulkhead fitting, an internal thread allows a direct mounting of a grease nipple and is supplied with a standard hand lever grease gun.